DA 15-05-60 Volz Servo

DA 15-05-60 Volz Servo 15mm, 5 volt;  a power version in same case design as the DA 14-05-32. Features enhanced dust and water-resistance characteristics, all steel gear trains and shielded, tightly sealed housings.

View cart

Description

DA 15-05-60 Volz Servo 15mm, 5 volt;  a power version in same case design as the DA 14-05-32. Features enhanced dust and water-resistance characteristics, all steel gear trains and shielded, tightly sealed housings.

 

About DA 15 Servos/Actuators

DA 15 servos (actuators) developed to meet rugged requirements. Machined from a solid block of saltwater resistant aluminum alloy, the sealed DA 15 cases meet IP 67 standard and provide EMI/RFI shielding. They can be provided with either an integrated M5 round connector system or with a pig tail connector.

Available also in a power variant and a speed variant. Both versions of the DA 15 actuators are fully programmable and use all steel gears. The cases feature integrated mounting facilities for horizontal and vertical fixing.

Optional: Position feedback.

 

About Volz Servos

A servo from Volz excels due to the simplicity of its design while simultaneously maximizing positioning force, reliability and durability. Moreover, a variety of electric interfaces makes it possible, for instance, to monitor the operating condition of the servos by reading out the current consumption, the internal temperature and humidity, etc.

Every actuator compromises a DC motor, a gear train and control electronics governed by microprocessors with integrated position feedback. These are electromechanical servo units that precisely position a radial output drive.

Depending on the type of actuator, the maximum travel in the standard configuration varies between 90° and 170°. Versions with larger travel of up to 330° or “Multiturn” versions can be provided on request.

 

About Volz

Founded in 1983, Volz Servos began designing, manufacturing and marketing exclusively electro mechanical actuators/servos worldwide. Volz has developed a product range that meets most customer requirements concerning maximized torque, speed, efficiency, reliability, and durability at minimized volume/weight, component and development costs.  Volz has a reputation for being experts in the market of compact, highly efficient actuators/servos.

Operating Data

Supply Voltage (rated) 5.0 V DC
Supply Voltage Range 4.8 …5.0 V DC
Standby Current at rated voltage
Rated Current at rated voltage 0.3 A
Peak Current at rated voltage 0.9 A
Rated Torque at rated voltage 6.3 Ncm (8.8 ozf-in)
Peak Torque at rated voltage 30 Ncm (30 ozf-in)
No Load Speed at rated voltage 330°/s
Rated Speed at rated torque 310°/s
Default Travel Angle ±45° = 90° total travel
Max. Travel Angle ±65° = 130° total travel
Backlash (mechanical) < 0.5°
Position Error under Temperature < ±1.0°
Operating Temperature -30°C … +70°C (-22°F…+158°F)
Storage Temperature -35°C…+80°C (-31°F…+176°F)

 

Command Signal

Signal Voltage Levels TTL-Level HIGH: min. 2.2V; max 5.0V
Signal Voltage Levels TTL-Level LOW: min 0.0V; max 0.8V
Frame Rate 7…20 ms
Valid Pulse Lengths 0.8…2.2 ms
Pulse Length for Position Left/Center/Right 1.0/1.5/2.0 ms
Resolution <1us

 

Material & Protective Features

Case Saltwater resistant Aluminum Alloy
Splash Water Resistance IP67 waterproof to 1m depth
Salt Water Resistance Case Material
EMI / RFI Shielding Case Shielded
Motor Brushed DC Motor
Gear Set Hardened Steel
Position Sensor Precision Potentiometer
Position Feedback Optional
MIL specified electrical connector Optional
Shielded Connecting Cable Optional
Industrial Standard M5 electrical connector Optional

 

Dimensions

Case Dimensions 29.4 mm x 39.4 mm x 14.6 mm ±0.2 mm (1.157 in x 1.551 in x 0.575 in ±0.008in)
Weight 26g (0.91 oz) ±10%

 

ELECTRICAL CONNECTION OPTIONS DA 15.05.__._.ST
Standard Connector Leads length 45mm
Manufacturer JST
Type ZMR-03
Mating ZHR-3
Pin Assignment
Red +V DC Supply Voltage
Black GND Supply Ground / Signal Ground
White SIG Command Signal

 

ELECTRICAL CONNECTION OPTIONS DA 15.05.__.P.ST
Standard Connector Leads length 45mm
Manufacturer JST
Type ZMR-03
Mating ZHR-3
Pin Assignment
Red +V DC Supply Voltage
Black GND Supply Ground / Signal Ground
White SIG Command Signal
Yellow Pos FB Position Feedback

 

ELECTRICAL CONNECTION OPTIONS DA 15.05__._.OA
MIL Specified Connector Leads length 45mm
Manufacturer Omnetics
Type MCS-05 WD
Mating MCP-05
Pin Assignment
Red +V DC Supply Voltage
Black GND Supply Ground / Signal Ground
White SIG Command Signal
Yellow Pos FB Position Feedback (Optional)
NC Not Connected

 

ELECTRICAL CONNECTION OPTIONS DA 15.05.__._.SC250
Shielded Cable Cable length 250mm
open leads
Manufacturer
Type LifYDY-UL 4×0
08mm2
Pin Assignment
Red +V DC Supply Voltage
Black GND Supply Ground / Signal Ground
Orange SIG Command Signal
Brown Pos FB Position Feedback

 

ELECTRICAL CONNECTION OPTIONS DA 15.05.__._.C
Industrial Standard M5 Electrical Connector 200 cm connecting cable w/ mating straight connector & open leads
Manufacturer Franz Binder GmbH & Co.
Type Series 707 No. 09 3111 86 04
Mating No. 7931083504 / No. 7931105204
Pin Assignment
Brown +V DC Supply Voltage
Black Pos FB Position Feedback (optional)
White GND Supply Ground / Signal Ground
Blue SIG Command Signal