DA 10-05-42 Volz Servo

DA 10-05-42 Volz Servo is a 10mm, 5 volt, fully programmable, low profile actuator with an all steel gear train.

SKU: DA-10-05-42 Category: Tags: , , , , , ,

View cart

Description

DA 10-05-42 Volz Servo is a 10mm, 5 volt, fully programmable, low profile actuator with an all steel gear train. The Volz DA 10 actuator is provided with a snap in mounting frame for fast and easy installation.

10mm actuator for use in the tightest installation space, fully programmable using our programming tool (available for accessories), steel gear train. Snap-in frame for fast, easy assembly.

 

About Volz Servos

A servo from Volz excels due to the simplicity of its design while simultaneously maximizing positioning force, reliability and durability. Moreover, a variety of electric interfaces makes it possible, for instance, to monitor the operating condition of the servos by reading out the current consumption, the internal temperature and humidity, etc.

Every actuator compromises a DC motor, a gear train and control electronics governed by microprocessors with integrated position feedback. These are electromechanical servo units that precisely position a radial output drive.

Depending on the type of actuator, the maximum travel in the standard configuration varies between 90° and 170°. Versions with larger travel of up to 330° or “Multiturn” versions can be provided on request.

 

About Volz

Founded in 1983, Volz Servos began designing, manufacturing and marketing exclusively electro mechanical actuators/servos worldwide. Volz has developed a product range that meets most customer requirements concerning maximized torque, speed, efficiency, reliability, and durability at minimized volume/weight, component and development costs.  Volz has a reputation for being experts in the market of compact, highly efficient actuators/servos.

Operating Data

Supply Voltage (rated) 5.0 V DC
Supply Voltage Range 4.8 …5.0 V DC
Standby Current at rated voltage Rated Current at rated voltage 0.25 A
Peak Current at rated voltage 0.74 A
Rated Torque at rated voltage 6 Ncm (8.4 ozf-in)
Peak Torque at rated voltage 30 Ncm (42 ozf-in)
No Load Speed at rated voltage 380°/s
Rated Speed at rated torque 325°/s
Default Travel Angle ±45° = 90° total travel
Max. Travel Angle ±65° = 130° total travel
Backlash (mechanical) < 0.9°
Position Error under Temperature < ±1.0°
Operating Temperature -30°C … +70°C (-22°F…+158°F)
Storage Temperature -35°C…+80°C (-31°F…+176°F)

 

Command Signal

Signal Voltage Levels TTL-Level HIGH: min. 2.2V; max 5.0V
Signal Voltage Levels TTL-Level LOW: min 0.0V; max 0.8V
Frame Rate 7…20 ms
Valid Pulse Lengths 0.8…2.2 ms
Pulse Length for Position Left/Center/Right 1.0/1.5/2.0 ms
Resolution <1us

 

Material & Protective Features

Case POM Chrome plated bottom case part
Splash Water Resistance not available
Salt Water Resistance not available
EMI / RFI Shielding not available
Motor Brushed 4.5 V DC Motor
Gear Set Hardened Steel
Position Sensor Precision Potentiometer
Position Feedback not available

 

Dimensions

Case Dimensions 38.0 mm x 26.5 mm x 10.0mm (1.496 in x 1.043 in x 0.394 in)
Weight 19g (0.67 oz) ±10%

Electrical Connection

Standard Connector
Manufacturer JST
Type ZMR-03
Mating ZHR-3
Pin Assignment
Red +V DC Supply Voltage
Black GND Supply Ground / Signal Ground
White SIG Command Signal

Product Accessories

ITEM ITEM NO.
Aluminum Servo Arm – short 1521.21
Aluminum Servo Arm – long 1521.22
Grommets (3 pcs.) 1521.25
Extension Lead – 50cm – 3 lead – 4g 110.050
Extension Lead – 80cm – 3 lead – 6g 110.080
Extension Lead – 100cm – 3 lead – 8g 110.100
Extension Lead – 150cm – 3 lead – 12g 110.150
Programming Tool 985.1