DA 13-05-32 Volz Servo
DA 13-05-32 Volz Servo 13mm, 5 volt, is a high speed version for applications requiring intermittent very fast response (no load speed > 600°/sec) and that have low continuous load requirements.
View cart
- Description
- Specifications
- Product Accessories
Description
DA 13-05-32 Volz Servo 13mm, 5 volt, is a high speed version for applications requiring intermittent very fast response (no load speed > 600°/sec) and that have low continuous load requirements.
DA 13-05-32 Volz Servo is an approved 13mm actuator with all steel gear train for highest possible robustness and minimized wear off. Fully programmable using the Volz programming tool (available as accessory). Integrated lug mounts for horizontal and vertical fixation allow fast and neat installation.
About Volz Servos
A servo from Volz excels due to the simplicity of its design while simultaneously maximizing positioning force, reliability and durability. Moreover, a variety of electric interfaces makes it possible, for instance, to monitor the operating condition of the servos by reading out the current consumption, the internal temperature and humidity, etc.
Every actuator compromises a DC motor, a gear train and control electronics governed by microprocessors with integrated position feedback. These are electromechanical servo units that precisely position a radial output drive.
Depending on the type of actuator, the maximum travel in the standard configuration varies between 90° and 170°. Versions with larger travel of up to 330° or “Multiturn” versions can be provided on request.
About Volz
Founded in 1983, Volz Servos began designing, manufacturing and marketing exclusively electro mechanical actuators/servos worldwide. Volz has developed a product range that meets most customer requirements concerning maximized torque, speed, efficiency, reliability, and durability at minimized volume/weight, component and development costs. Volz has a reputation for being experts in the market of compact, highly efficient actuators/servos.
Operating Data
| Supply Voltage (rated) | 5.0 V DC |
| Supply Voltage Range | 4.8 …5.0 V DC |
| Standby Current at rated voltage | |
| Rated Current at rated voltage | 0.3 A |
| Peak Current at rated voltage | 0.9 A |
| Rated Torque at rated voltage | 4.5 Ncm (6.3 ozf-in) |
| Peak Torque at rated voltage | 20 Ncm (28 ozf-in) |
| No Load Speed at rated voltage | 620°/s |
| Rated Speed at rated torque | 540°/s |
| Default Travel Angle | ±55° = 110° total travel |
| Max. Travel Angle | ±65° = 130° total travel |
| Backlash (mechanical) | < 0.9° |
| Position Error under Temperature | < ±1.0° |
| Operating Temperature | -30°C … +70°C (-22°F…+158°F) |
| Storage Temperature | -35°C…+80°C (-31°F…+176°F) |
Command Signal
| Signal Voltage Levels | TTL-Level HIGH: min. 2.2V; max 5.0V |
| Signal Voltage Levels | TTL-Level LOW: min 0.0V; max 0.8V |
| Frame Rate | 7…20 ms |
| Valid Pulse Lengths | 0.8…2.2 ms |
| Pulse Length for Position Left/Center/Right | 1.0/1.5/2.0 ms |
| Resolution | <1us |
MAterial & Protective Features
| Case | POM | Chrome plated bottom case part |
| Splash Water Resistance | not available | |
| Salt Water Resistance | not available | |
| EMI / RFI Shielding | not available | |
| Motor | Brushed DC Motor | |
| Gear Set | Hardened Steel | |
| Position Sensor | Precision Potentiometer | |
| Position Feedback | Optional | |
| MIL specified electrical connector | Optional | |
| Shielded Connecting Cable | Optional |
Dimensions
| Case Dimensions | 28.4 mm x 38.0 mm x 13.3mm ±0.2 mm (1.122 in x 1.496 in x 0.512 in ±0.008in) |
| Weight | 19g (0.67 oz) ±10% |
Electrical Connection Options, DA 13.05._._.ST
| Standard Connector | Leads length 45mm | |
| Manufacturer | JST | |
| Type | ZMR-03 | |
| Mating | ZHR-3 | |
| Pin Assignment | ||
| Red | +V DC | Supply Voltage |
| Black | GND | Supply Ground / Signal Ground |
| White | SIG | Command Signal |
Electrical Connection Options, DA 13.05._._.P
| Standard Connector | Leads length 45mm | |
| Manufacturer | JST | |
| Type | ZMR-03 | |
| Mating | ZHR-3 | |
| Pin Assignment | ||
| Red | +V DC | Supply Voltage |
| Black | GND | Supply Ground / Signal Ground |
| White | SIG | Command Signal |
| Yellow | Pos FB | Position Feedback |
Electrical Connection options, DA 13.05._._.OA
| MIL Specified Connector | Leads length 45mm | |
| Manufacturer | Omnetics | |
| Type | MCS-05 WD | |
| Mating | MCP-05 | |
| Pin Assignment | ||
| Red | +V DC | Supply Voltage |
| Black | GND | Supply Ground / Signal Ground |
| White | SIG | Command Signal |
| Yellow | Pos FB | Position Feedback (optional) |
| – | NC | Not connected |
Electrical Connection Options, DA 13.05._._.SC250
| Shielded Cable | Cable length 250mm | open leads |
| Manufacturer | ||
| Type | LifYDY-UL 4×0 | 08mm2 |
| Pin Assignment | ||
| Red | +V DC | Supply Voltage |
| Black | GND | Supply Ground / Signal Ground |
| Orange | SIG | Command Signal |
| Brown | Pos FB | Position Feedback |
| Shielded Cable | Cable length 250mm | open leads |
| Manufacturer | ||
| Type | LifYDY-UL 4×0 | 08mm2 |
| Pin Assignment | ||
| Red | +V DC | Supply Voltage |
| Black | GND | Supply Ground / Signal Ground |
| Orange | SIG | Command Signal |
| Brown | Pos FB | Position Feedback |
