-
Aerial Imaging, FiltersNi120 Neutral Density Filter
Ni120 Neutral Density Filters can be used to reduce the amount of light reaching the camera to about 6.25% transmission, thus allowing longer exposure times that result in reduced depth of…
-
Aerial Imaging, FiltersNi090 Neutral Density Filter
Ni090 Neutral Density Filters exhibit uniform attenuation over the entire visible and near-IR range that most industrial CCD/CMOS cameras are sensitive within.
-
Aerial Imaging, FiltersNi060 Neutral Density Filter
Ni060 Neutral Density Filters are used to restrict visible and/or near-IR light, reducing the amount reaching the camera sensor, thus allowing for longer exposure times and reduced depth of field.
-
Aerial Imaging, FiltersND400 Neutral Density Filter
ND400 Neutral Density Filter absorptive neutral density filters have an optical density of 4.0, meaning that they transmit an average of 0.01% of visible light.
-
Aerial Imaging, FiltersND300 Neutral Density Filter
ND300 Neutral Density Filter absorptive neutral density filters have an optical density of 3.0, meaning that they transmit an average of 0.1% of visible light.
-
Aerial Imaging, FiltersND200 Neutral Density Filter
ND200 Neutral Density Filter absorptive neutral density filters have an optical density of 2.0, transmitting an average of 1% of the visible spectrum.
-
Aerial Imaging, FiltersND120 Neutral Density Filter
ND120 Neutral Density Filter absorptive neutral density filters have an optical density of 1.2, averaging 6.25% transmission over the visible spectrum.
-
Aerial Imaging, FiltersND090 Neutral Density Filter
ND090 Neutral Density Filter absorptive neutral density filters have an optical density of 0.9, or approximately 12.5% transmission across the visible spectrum.
-
Aerial Imaging, FiltersND060 Neutral Density Filter
ND060 Neutral Density Filter absorptive neutral density filters have an optical density of 0.6, or approximately 25% transmission within the visible spectrum.
-
Aerial Imaging, FiltersND030 Neutral Density Filter
ND030 Neutral Density Filter absorptive neutral density filters have an optical density of 0.3, or approximately 50% transmission across the visible spectrum.
- Home
- Shop
- Aerial Imaging
- Coating Solutions
- Hyperspectral
- Propellers
- Amps & Filters
- Data Links
- INS Sensors
- Rugged Cases
- Antennas
- Drone Lighting
- Launch Pads
- Servos
- ATC Devices
- Engines
- Meteorological Sensors
- Speed Controllers
- Autopilots
- Gimbals
- Motors
- Tether Systems
- Batteries
- GPS & GNSS
- NDVI
- Unmanned Vehicles
- Charging Systems
- Ground Equipment
- Parachutes
- Wind Sensors
- News
- Events
- Our Clients
- Our Partners
- About
00
